|
|
|
The CraftsmanŽ radial arm saw blade guard kit is only available for certain CraftsmanŽ 10-inch model radial arm saws. 1. Find Your Saw Model Number To see if a guard kit is available for your 10-inch CraftsmanŽ radial arm saw, you will need to locate and write down the model number of your saw. The model number is usually stamped on a plate located on the front of the metal table stand that came with your saw. Please write down this model number and check it using our database utility below. All eligible CraftsmanŽ radial arm saw model numbers begin with a "113." followed by either a "1" or a "2". If the model number you wrote down does not fit this pattern, you may have written down the serial number or the part number of the guard on your 10-inch CraftsmanŽ radial arm saw.
2. Look up Your Guard Kit Number Once you have located and written down the model number of your saw, look up your model number using the search utility to find if a guard kit is available. If a kit is available for your saw, you will need to write down the correct Guard kit number to be able to order it. If you need help with your model number or guard kit number please click here. |
|||||||||
Search Utility Use this search utility to determine your kit model number. Enter your kit number EXACTLY as it appears on the saw. You must include 113.(refer to the example), and please make sure there are no spaces between the numbers - Example - saw model number - 113.199250 If you
are using a Canadian model, please be sure to put a "C" after
the model number. NOTE: If you receive a message in the guard kit field that says NOT_EFFECTED_BY_THIS_RECALL this means your saw already has the new guard kit.
|
| Atlas North llc. Admin Login |
