Craftsman Radial Arm Saw Recall

Check RAS Model

The Craftsman® radial arm saw blade guard kit is only available for certain Craftsman® 10-inch model radial arm saws.

1. Find Your Saw Model Number

To see if a guard kit is available for your 10-inch Craftsman® radial arm saw, you will need to locate and write down the model number of your saw. The model number is usually stamped on a plate located on the front of the metal table stand that came with your saw.

All Craftsman® radial arm saws that are covered by this recall will begin with a "113." followed by either a "1" or a "2". If the model number you wrote down does not fit this pattern, you may have written down the serial number or perhaps the part number of the guard on your 10-inch Craftsman® radial arm saw.

2. Look up Your Guard Kit Number

Once you have located and written down the model number of your saw, look up your model number using the RAS Model search utility below to find if a guard kit is available or whether it qualifies for the non-retrofittable $100 option.

If you need help with your model number or guard kit number please click here.

RAS Model Search Utility
Use this search utility to determine if your saw is recalled. Enter your saw's model number. Enter your model number EXACTLY as it appears on the saw. You must include "113".Refer to the examples below, and please make sure there are no spaces between the numbers -

Example - saw model number - 113.199250

If you have a Canadian model, there will be a “C” at the end of the model number. Please be sure to include the "C" in your model number.
Example - Canadian saw model number - 113.278540C

Enter Your Saw Model Number:

To order by telephone, please call:
1-800-511-2628